This is an old revision of the document!
Plan 9 instance under Xen
Installation or pre-generated
VPS Maintenance Shell
- /reveal/bc/VPS/Shell_q
VPS Maintenance Shell for plan9* (xxx.xxx.xx.xx)
no stats collected.
[c] - Connect to your console
[l] - list your status
[r] - reset or start
[s] - Force Shutdown (not an OS shutdown)
[t] - toggle your Operating System
[i] - Switch your VPS ID (multiple VPS members only)
[x] - Clean install (destroys data)
[p] - Change your vps.sdf.org password
[u] - View current interface statistics
[U] - View all recorded interface statistics
[q] - Disconnect
[30-Oct-20 22:59:17] Command: q
Connection to vps? closed.
$
- /reveal/bc/VPS/Shell_r
[30-Oct-20 22:59:17] Command: r
Connect to the System Console - To return to the menu, press ^]
bootargs is (tcp, tls, il, local!device)[local!/dev/sdC0/fs]
| x | Press the enter key to accept the default [ ]. |
bootargs is (tcp, tls, il, local!device)[local!/dev/sdC0/fs]
user[glenda]:
| x | Press the enter key to accept the default [ ]. |
step-by-step installation
default pre-generated installation
Install
After receiving notification of an allocated VPS slice, connect by '$ ssh <SDF member ID>@<VPS slice>.sdf.org'. The password1 is the same as your SDF member login. At the VPS Maintenance Shell menu, type 'x' for a Clean Install.
% WARNING! YOU WILL LOSE YOUR DATA!
This function allows you to completely destroy your plan9 image
and install a fresh generic distribution.
Do you wish to continue? (yes/no) yes
% Copying a fresh plan9 image [PLEASE WAIT]
% Copying a fresh plan9 image [PLEASE WAIT] [COMPLETE]
(continue)
You will now see the Plan 9 VPS console rc prompt (%), Plan 9's shell.
Plan 9 shell
| x | ctl-h is backspace, kind of; ctl-u erases the current line. As seen, with the VPS Plan 9 console prompt ctl-h backspace, the screen output may not be what one would expect. |
| x | To detach the Plan 9 console prompt (%), while retaining the ability to reattach it without rebooting your server, press ctl-] to close the prompt (%). Then, press 'q' to disconnect the VPS Maintenance Shell menu, and ssh connection. You can return again with another ssh to the allocated VPS server, an SDF VPS Maintenance Shell menu review, and a press on the 'c' key to connect to the Plan 9 console prompt (%). |
Networking
| x | Review the /usr/glenda/start file, or rc script, from the VPS console prompt (%). |
term% cat /usr/glenda/start
| x | Run the /usr/glenda/start file, or rc script, from the VPS console prompt (%). |
| | Type ./start to start network and set a password for glenda. |
term% ./start
starting ...
setting a password for the user glenda
password:
term%
The mentioned /usr/glenda/start file does not require editing. Any edit1 can be made with % ed, or % sam -d, from the VPS console prompt (%), or later with % ed, % sam, or % acme, from the Drawterm rio rc prompt (%).
| x | This shutdown and restart section applies, and may_be_necessary2 after an % fshalt, before the networking is restarted. |
1 % man dp9ik 2 % fshalt from an rc prompt (%), then at the “VPS Maintenance Shell” enter 's' - force shutdown, then enter 'r' - reset or start.
Shutdown and restart
- /reveal/bc/VPS/Shell
VPS Maintenance Shell for plan9* (xxx.xxx.xx.xx)
no stats collected.
[c] - Connect to your console
[l] - list your status
[r] - reset or start
[s] - Force Shutdown (not an OS shutdown)
[t] - toggle your Operating System
[i] - Switch your VPS ID (multiple VPS members only)
[x] - Clean install (destroys data)
[p] - Change your vps.sdf.org password
[u] - View current interface statistics
[U] - View all recorded interface statistics
[q] - Disconnect
[30-Oct-20 22:59:17] Command: q
Connection to vps? closed.
$
| x | % fshalt from a Drawterm rio rc prompt (%), is okay. Close the local Drawterm application separately. |
From the 9front Drawterm rio rc prompt:
cpu% fshalt
halting.../srv/hjfs.cmd...
done halting
cpu%
| x | % fshalt from the 9front VPS console rc prompt (%), then at the “VPS Maintenance Shell” enter 's' - force shutdown, then enter 'r' - reset or start. |
From the 9front VPS Maintenance Shell console prompt:
term% fshalt
halting.../srv/hjfs.cmd...halted at Fri Oct 30 15:58:54 2020.
done halting
term%
| 1 | Press ctl-] to continue, if viewing where the VPS console rc prompt (%) was once active. Press the '[Enter]' key to access the VPS Maintenance Shell (may apply). |
| x | From the VPS Maintenance Shell enter 's' - force shutdown, then enter 'r' - reset or start, or 'q' - disconnect. Enter 'l' to list your status. |
| x | From the VPS Maintenance Shell enter 's' - force shutdown before starting the SDF 9front VPS. Ping the SDF Plan 9 VPS IP address (YOUR_IP) to determine if the VPS is running with networking. |
$ ping YOUR_IP
Reference:
| README (slightly outdated) If you think of it as UNIX, you'll often be frustrated because something doesn't exist or works differently. |
1 NetBSD Xen [ ] running Plan 9 Boot Camp participants' VMs, during the announced Plan 9 Boot Camp occurrences. 2 plan9front running natively on hardware.
