using_freepbx_with_sdf_voip
This is an old revision of the document!
Table of Contents
Using FreePBX with SDF VOIP
This tutorial shows how to add your SDF VOIP extension as a trunk in FreePBX.
Prerequisites
- A working FreePBX setup
- Access to the FreePBX admin interface
Procedure
In the admin interface follow these steps, replacing $EXTENSION
and $PASSWORD
with your extension number and password respectively:
1 | Go to Connectivity » Trunks |
2 | Select Add Trunk and choose Add SIP (chan_sip) trunk |
3 | Set Trunk Name to sdf |
4 | Set Outbound Caller ID to $EXTENSION@sip.sdf.org |
5 | Set CID Options to Force Trunk CID |
6 | Go to the sip Settings tab |
7 | Set Trunk Name to SDF |
8 | Set peer details to: host=sip.sdf.org |
username=$EXTENSION secret=$PASSWORD type=friend context=from-trunk insecure=port,invite trustrpid=yes sendrpid=yes directmedia=no qualify=yes keepalive=45 nat=yes dtmfmode=rfc2833 disallow=all allow=ulaw
9 | Go to the Incoming tab |
10 | Set Register String to $EXTENSION:$PASSWORD@sip.sdf.org |
11 | Click Submit |
You can now define Inbound and Outbound routes using this new trunk. To test inbound calls, you can queue a test call through maint
.
$Id: sdf_voip_freepbx.html,v 1.2 2017/11/07 12:49:54 irl Exp $ Using FreePBX with SDF VOIP] - traditional link (using [[wp>Revision_Control_System|RCS)
using_freepbx_with_sdf_voip.1616216995.txt.gz · Last modified: 2021/03/20 05:09 by hc9