This is an old revision of the document!

Using FreePBX with SDF VOIP

This tutorial shows how to add your SDF VOIP extension as a trunk in FreePBX.

Prerequisites

A working FreePBX setup
Access to the FreePBX admin interface

Procedure

In the admin interface follow these steps, replacing $EXTENSION and $PASSWORD with your extension number and password respectively:

1	Go to Connectivity » Trunks
2	Select Add Trunk and choose Add SIP (chan_sip) trunk
3	Set Trunk Name to `sdf`
4	Set Outbound Caller ID to `$EXTENSION@sip.sdf.org`
5	Set CID Options to Force Trunk CID
6	Go to the sip Settings tab
7	Set Trunk Name to `SDF`
8	Set peer details to: host=sip.sdf.org

    username=$EXTENSION
    secret=$PASSWORD
    type=friend
    context=from-trunk
    insecure=port,invite
    trustrpid=yes
    sendrpid=yes
    directmedia=no
    qualify=yes
    keepalive=45
    nat=yes
    dtmfmode=rfc2833
    disallow=all
    allow=ulaw

9	Go to the Incoming tab
10	Set Register String to `$EXTENSION:$PASSWORD@sip.sdf.org`
11	Click Submit

You can now define Inbound and Outbound routes using this new trunk. To test inbound calls, you can queue a test call through maint.

$Id: sdf_voip_freepbx.html,v 1.2 2017/11/07 12:49:54 irl Exp $ Using FreePBX with SDF VOIP] - traditional link (using [[wp>Revision_Control_System|RCS)

Table of Contents

Using FreePBX with SDF VOIP

Prerequisites

Procedure