Differences

This shows you the differences between two versions of the page.

--- sdf_voip_client [2022/11/16 20:19] – [Linphone for iOS] hc9
+++ sdf_voip_client [2023/11/02 19:55] (current) – Add note about Poly VVX 201 and Impossible Digitmap Match mcornick
@@ Line 1: / Line 1: @@
 ====== SDF VoIP Client ======
-Below are instructions on configuring a SIP client to work with SDF's VOIP service. Please see the [[setting_up_a_sip_phone_with_sdf_voip|Setting up a SIP phone with SDF VoIP]] for more information.
+Below are instructions on configuring a SIP client to work with SDF's VOIP service. Please see the [[setting_up_a_sip_phone_with_sdf_voip|SDF VoIP tutorial]] for more information.
 **Client Instructions**
@@ Line 47: / Line 47: @@
 {{:sdf_voip_client:grandstream_voip.png?nolink|Grandstream Device Configuration}}
+===== Grandstream HT801/HT802 ATA =====
+Grandstream HT801/HT802 are Analog Telephone Adapters which support analog phones, including older rotary dial models. Newer firmware versions allow pulse dial and high powered ringing. The HT802 supports two lines.
+  * These devices have a web configuration interface running on it's LAN IP address. The default username and password are: admin/admin. For factory locked devices from Vonage, see [[http://sdf.org/?tutorials/ht802_factory_unlock|Unlocking Grandstream_HT802]] (This is an advanced topic and will void your warranty).
+  * Navigate to the tab labelled 'FXS PORT1'
+  * Primary SIP Server: sip.sdf.org
+  * SIP User ID: (Your 4-digit extension)
+  * Authenticate ID: (Your 4-digit extension)
+  * Authenticate Password: (Your SIP password, see 'maint')
+  * (Optionally) Name: (Your Name)
+  * Note: With NAT Traversal disabled, you may need to forward UDP fort 5060 from your router to the Gateway devices IP Address.
+{{:sdf_voip_client:ht802_config.png?nolink|Grandstream Device Configuration}}
 ===== Grandstream Handytone 286 =====
@@ Line 107: / Line 121: @@
 This tutorial is far from complete. Wanna make it better? Edit it!
+===== Polycom VVX 201 =====
+(and probably other Poly phones of this class)
+These are pretty straightforward to set up with the web UI (connect to http://your.phones.ip.address, login as admin, default admin password if you haven't changed it is 456.) "Simple Setup" should get you going.
+Once you're set up, you'll notice that trying to dial extensions beginning with 10 won't work. Go to the Line settings, find "Impossible Digitmap Match" and set it to 2. Apply the settings, then try dialing 1006 and you should hear the dulcet tones of CQ Serenade.
 ----