Differences

This shows you the differences between two versions of the page.

--- using_freepbx_with_sdf_voip [2022/02/25 05:00] – hc9
+++ using_freepbx_with_sdf_voip [2023/07/03 20:07] – [Using FreePBX with SDF VOIP] hc9
@@ Line 1: / Line 1: @@
-====== Using FreePBX with SDF VOIP ======
-This tutorial shows how to add your SDF VOIP extension as a trunk in [[https://www.freepbx.org/|FreePBX]].
-===== Prerequisites =====
-  * A working FreePBX setup
-  * Access to the FreePBX admin interface
-===== Procedure =====
-In the admin interface follow these steps, replacing ''$EXTENSION'' and ''$PASSWORD'' with your extension number and password respectively:
-  - Go to //Connectivity// » //Trunks//
-  - Select //Add Trunk// and choose //Add SIP (chan_sip) trunk//
-  - Set //Trunk Name// to ''sdf''
-  - Set //Outbound Caller ID// to ''<$EXTENSION@sip.sdf.org>''
-  - Set //CID Options// to //Force Trunk CID//
-  - Go to the //sip Settings// tab
-  - Set //Trunk Name// to ''SDF''
-  - Set peer details to:<code>
-host=sip.sdf.org
-username=$EXTENSION
-secret=$PASSWORD
-type=friend
-context=from-trunk
-insecure=port,invite
-trustrpid=yes
-sendrpid=yes
-directmedia=no
-qualify=yes
-keepalive=45
-nat=yes
-dtmfmode=rfc2833
-disallow=all
-allow=ulaw
-</code>
-  - Go to the //Incoming// tab
-  - Set //Register String// to ''$EXTENSION:$PASSWORD@sip.sdf.org''
-  - Click //Submit//
-You can now define Inbound and Outbound routes using this new trunk. To test inbound calls, you can queue a test call through ''maint''.
-|If you have an incoming DID through SDF, just a note that the SDF's system does not pass ''FROM_DID=''.|
-|If you would like to route your call through a specific incoming route by DID, then add the DID after the registration string.|
-|For example: ''$EXTENSION:$PASSWORD@sip.sdf.org/$DID'' You can add the 11 or 10 digit number, just make sure it matches exactly to what you want in the incoming route.|
-$Id: sdf_voip_freepbx.html,v 1.2 2017/11/07 12:49:54 irl Exp $ [[http://sdf.org/?tutorials/sdf_voip_freepbx|Using FreePBX with SDF VOIP]] - traditional link (using [[wp>Revision_Control_System|RCS]])