In this tutorial, we'll briefly explain some basic file and shell operations using the following commands:

1. touch – create a file
2. pwd – print working directory
3. ls – list files in current directory
4. cp – copy a file
5. mv – move a file
6. rm – remove a file
7. file – examine type of file
8. less – read a file
9. mkdir – create a directory
10. cd – change directory
11. rmdir – remove a directory
12. clear – clear screen

Please note that the above commands each have a man-page that will describe in more detail the full possibilities of each command. In this tutorial, we'll simply give a short overview, enough to get things done on the command line. For more information on man-pages, see the Finding Help From Within the Shell tutorial.

First some notes about:

• Command options
• File naming

All of the commands above and many commands you'll discover and use in the shell can be modified with the use of options. See the man-pages for details about the available options for each command. Options normally come in the form of ls -l, that is, you type the command, space over once, type a dash and the letter for the option you need to use.

Something unique for the SDF server, the SDF server now offers both commands with BSD style options and commands with GNU style options. For example, ls provides users with a command providing BSD style options. The command gls, which is prefixed with a “g” designates the ls command providing GNU style options. This is very noteworthy because most users are more aquainted with binaries with GNU style options. The most popular commands are: gls –color=always and gdiff.

It's good form to name a file or directory without empty spaces in the name. A file such as my journal.txt may be more cumbersome to handle than a file called my_journal.txt. This is because the shell wants to see the above my journal.txt as two separate files: one that is called my and another that is called journal.txt.

If you happen upon a file with empty spaces in its name, you can use the following methods to manipulate it:

Use single or double quotes around the file, for example:

rm "my file.txt"

or

cp 'my file.txt' my_file.txt

Use a backslash where there's an empty space:

mv my\ file.txt my_file.txt

or

cd backups/text\ pages/

Many shells support tab completion. This means if you type the first two or three characters of a file name and press your Tab button, unless you have multiple files with similar beginning names, your shell may be able to finish the word completion for you. Note: if you're not in the same directory as the file you want to tab complete, you'll need to provide the path, which tab-completion can help with also.

Also, when naming a file using two or more words, the safest choices you have to use are the underscore, the dash, and the period. Examples are:

my_file.txt
my-file.txt
my.file.txt

Or, you can keep it as one word:

myfile.txt

Using other symbols, like the ampersand, may cause problems because some of these symbols may mean other things to the shell. As always, for more information you should read the man-pages for the shell of your choice.

in the examples below, you'll be typing these commands at the shell prompt, so they will appear after a $ or a % prompt.

To create a file without invoking a text editor or another program, one simply has to touch it. For example, to create a file called orange.txt, at the command prompt type:

touch orange.txt

Nothing much to that! To see the file you created you have the ability to list the file(s) and directories in the current working directory. First, let's see which directory we are in. By default, upon creating a ssh link or a telnet link to your shell account, you will be in your home directory. To confirm this, at the command prompt you can type:

pwd

If your user name is georgette, you may get something like this:

/udd/g/georgette

Or if you're on your home computer, perhaps you'll see something like this:

/home/georgette

Now to list the files in your current directory, type:

ls

If you followed the tutorial and created the orange.txt file with the touch command, you should see this file in what the ls command yields. Next, try ls with the various options below and see the difference in the kinds of information each option provides:

ls -l
ls -hl
ls -a
ls -al
ls -ahl

Copying a file is likewise very easy. The copy command serves two important functions: to make a simple backup of the file in question and to also rename a file while keeping the original.

Say you want to backup your orange.txt file to a sub-directory (more about creating directories in a moment) called backups. To do so, you would type the following:

cp orange.txt backups/

The forward slash at the end of the word backups means that this is a directory.

To use the cp command to change the name of the file without destroying the original you would type the following:

cp orange.txt papaya.txt

where papaya.txt is the new name of the file.

And to copy the original orange.txt file to the backup directory and to change the name at the same time, you would type:

cp orange.txt backups/papaya.txt

The mv command works similarly to the cp command but with one vital difference. Moving a file means destroying the original file name. Thus the following command:

mv orange.txt papaya.txt

essentially replaces the orange.txt with the new papaya.txt file.

You can keep the file name the same with the mv command by moving the file to a separate directory. To do so, type the following:

mv orange.txt backups/

This would move the orange.txt file to the backups directory. To move the file to the backups directory and to rename it then, you'd type:

mv orange.txt backups/papaya.txt

Removing a file is also very simple. The command to do so is rm. To completely remove and destroy a file simply type:

rm orange.txt

The commands for copying, moving and removing files if carelessly used may wreak a bit of havoc for you. For these commands, you may want to invoke the interactive option by typing:

cp -i orange.txt backups/orange.txt
mv -i orange.txt papaya.txt
rm -i orange.txt

When the interactive option is called, you'll be prompted to answer yes or no to each file you are asking to be removed. For cp -i and mv -i, you'll be prompted if and only if the file you are copying to or moving will overwrite another file.

The file command is useful to determine what type of file a file is. In unix-like operating systems, a file's name is fairly flexible and the file extension, e.g. the .txt appendage, is not always necessary. So if someone sent you a file and you wanted to be certain what type of file it was before you opened it, use the file command like so:

file name_of_file

The results for a text file would be something like this:

name_of_file: ASCII text

Say someone sent you an image file called something.something in the PNG format and you wanted to be certain it was actually a PNG file, simply type:

file something.something

If the file is truly a PNG file, you should see something similar to this:

something.something: PNG image data, 922 x 691, 8-bit/color RGBA, non-interlaced

The less command is a type of pager available to view and browse through text files without altering or opening the file in a text editor. You're encouraged to read the man-page for this command because it possesses many useful attributes such as searching through text for key words or strings. Invoke it with the name of the file you want to view:

less orange.txt

If there is more text in the file than can fit on your computer screen, press the space-bar to scroll down page by page. Oftentimes, your Page Up and Page Down buttons on your keyboard will work and the arrow keys normally allow you to go up and down through the file line by line.

You create a directory by using the mkdir command. To create the backups directory we used in earlier examples, type:

mkdir backups

The cd command is used to change directories. If we are in our home directory and want to go to the newly created backups sub-directory, we'd simply type:

cd backups

To go back simply type:

cd

Typing cd all by itself will always take you back to your home directory which is useful if you're deep in another branch of the directory tree. If you just want to go back up a level, type:

cd ..

And of course, you can always type the full path to the directory you want to change to:

cd /usr/bin 

To switch back to the previous working directory, type:

cd -

And to remove an empty directory, you use the the rmdir command.

rmdir backups

The rmdir will only work if the directory you want to remove is empty of files. If a directory contains files in it and you are sure you want to remove said directory along with all the files in it, you actually have to go back to the rm command and type:

rm -r name_of_directory

The -r is a command option telling the rm or remove command to delete the directory and all contents including subdirectories. It stands for recursive. Be very careful about using this command! In fact, a better way to run this command is by typing:

rm -ir

This invokes the interactive use of the remove command which prompts you to answer yes or no to each file and directory to be possibly removed. Again, read the man-pages for more details.

Finally, to clear the screen type the following at the prompt:

clear

legacy link: http://sdf.org/?tutorials/file_operations ,v 1.11 2009/11/28 10:39:54 rogerx Exp $